Company Profile
Zhejiang Nanfeng Electric Co., Ltd. is a company. With DC contactor as the leading factor, it integrates production, R & D, manufacturing anAn enterprise that can be integrated. Our company is specialized in producing medium load and heavy load DC contactor is suitable for electric forklifts, battery cars, tractors, and excavating. Machine, automobile air conditioner, communication power supply, uninterrupted power supply, electroplating power supply, etc. system The switch control of the integrated electronic control circuit has the advantages of small volume and large load capacity. Long service life, simple maintenance, wide application range, and well received by users. Welcome.
Nanfeng electric since its inception, has always maintained the technological innovation of sustainable innovation. Concept, with quality products and perfect service in the industry rapidly rising. The company adheres to the management concept of "people-oriented, pioneering and innovating". To raise the enterprise Employees' own quality will enhance their comprehensive competitiveness. common In the same industry, the company is the first to pass the TS16949 quality system certification, the "CCC" compulsory certification and "CQC" voluntary certification of China Quality Certification Center and the quality certification of CE, FCC, UL and TUV products.
TEL: +86-577-62797256 62776658
FAX:+86-577-62797257
EMAIL:king@kingnan.com
Product Description
Ordering Notice
- For example: ZJW50-20S/12V
- The DC contactor of main contact is 2NO, with micro switch, vertical installation, rated voltage not more than DC80V, current 50A, coil voltage is
Application
The product is mainly used in the EPS power supply of the communication base station, and the contacts can also be used for AC loads of 380V, 220V and 110V. The product coil is DC powered,
Technical Parameters
| Electric Parameters | |||
| Contact type | 2 NO of bridge type | Instantaneous maxi (closing) current | 7Ie,≤1s |
| Rated voltage of contacts (DC) | DC: 80V; AC: 380V | Insulation resistance(MΩ) | ≥100 |
| Rated current of contacts (A) | DC: 50; AC: 10 | Dielectric withstand voltage | 2500V,p.f. 1min, no breakdown |
| Voltage drop on contacts(mV) | ≤100 | Electric cycles (104) | ≥2 |
| Coil voltage specification(DC) | 6~220V | Mechanical cycles (104) | ≥30 |
| DC power consumption of coil (W) | ≤12 | Temperature rise on outgoing terminal | ≤65 |
| Pickup voltage(DC) | ≤70%Ue | Temperature rise of coil(K) | ≤85 |
| Release voltage(DC) | ≥5%Ue;≤40%Ue | Insulation grade of enameled wire | Class B (130°C) |
| Pickup time(ms) | ≤50 | Material of contact | AgCuO(10)/Cu |
| Release time(ms) | ≤50 | Working duty | Continuous operating duty |
Outline and Mounting Picture
Ordering Notice
- For example:: ZJW400HT/12V
- The DC contactor of main contact is commutation, rated voltage not more than DC48V, current 400A,
Application
The products are mainly used to control switching on/off of power supply of storage battery car, electric forklift, electric winch, electric car, excavator, air conditioner in vehicle, power source
Technical Parameters
| Electric Parameters | |||
| Contact type | A set of conversion contacts | Instantaneous maxi (closing) current | 7Ie,≤1s |
| Rated voltage of contacts (DC) | ≤48V | Insulation resistance(MΩ) | ≥100 |
| Rated current of contacts (A) | 400 | Dielectric withstand voltage | 1500V,p.f. 1min, no breakdown |
| Voltage drop on contacts(mV) | ≤100 | Electric cycles (104) | ≥2 |
| Coil voltage specification(DC) | 12V, 24V, 48V, 72V etc | Mechanical cycles (104) | ≥30 |
| DC power consumption of coil (W) | ≤24W | Temperature rise on outgoing terminal | ≤65 |
| Pickup voltage(DC) | ≤70%Us | Temperature rise of coil(K) | ≤85 |
| Release voltage(DC) | ≥5%Us;≤40%Us | Insulation grade of enameled wire | Class B (130°C) |
| Pickup time(ms) | ≤50 | Material of contact | AgCuO(10)/Cu |
| Release time(ms) | ≤50 | Working duty | Continuous operating duty |
Outline and Mounting Picture
