The products are mainly used to control switching on/off of power supply of storage battery car, electric forklift, electric winch, electric car, excavator, air conditioner in vehicle
InquiryApplication
NF200CZ DC Contactor 200A main contact DC contactor is bridge type, rated voltage is not greater than DC 96V, current 200A, magnetic holding structure, with self-recovery function module.
Ordering Notice
For example: NF200CZ-1/12V
The DC contactor of main contact is Bridge type, rated voltage not more than DC 96V, current 200A, Magnetic retention structure with self-recovery function module, The voltage specification is
Basic Technical Parameters (at normal conditions) | |||
Electric Parameters | |||
Contact type | One pair of bridge type moving close (NC) contacts |
Instantaneous maxi (closing) current | 7Ie,≤1s |
Rated voltage of contacts (DC) | ≤96V | Insulation resistance(MΩ) | ≥100 |
Rated current of contacts (A) | 200 | Dielectric withstand voltage | 1500V,p.f. 1min, no breakdown |
Voltage drop on contacts(mV) | ≤80 (at 100A) | Electric cycles (104) | ≥2 |
Coil voltage specification(DC) | 12V, 24V etc | Mechanical cycles (104) | ≥30 |
DC power consumption of coil (W) | ≤24V(Normal use of zero power) | Temperature rise on outgoing terminal | ≤65 |
Pickup voltage(DC) | ≤75%Us(Positive power up) | Material of contact | AgCuO(10)/Cu |
Release voltage(DC) | ≥40%Us(Power does not need to be reversed) | Working duty | Continuous operating duty |
Pickup time(ms) | ≤30 | ||
Release time(ms) | ≤50 | ||
Mechanical/Ambient Conditions | |||
Torque of outgoing terminal on contact M8(N.m) |
≯9.0N appropriate | Protection grade | IP67 |
Coil lead | Waterproof plug(Red”+”, Black”-”) | Mounting methods | Freely |
Working temperature | (-25~+55)°C | Vibration | Sine shock: 2.5g, (5~50) Hz |
Mounting altitude | ≤2Km | Impact | 50g,11ms(Half sine) |
Outline and Mounting Picture