The products are mainly used to control switching on/off of power supply of storage battery car, electric forklift, electric winch, electric car, excavator, air conditioner in vehicle
Application
ZJ600D 600A single pole DC Contactor coil voltage specifications (DC) include 12V, 24V, 48V, 72V, etc., continuous operation on duty, simple and quick installation, suitable for cars, ships, batteries, forklifts, etc.
Ordering Notice
For example: ZJ600D/12V
The DC contactor of main contact is one NO, rated voltage not more than DC 80V, current 600A, coil
| Basic Technical Parameters (at normal conditions) | |||
| Electric Parameters | |||
| Contact type | One pair of bridge type moving open (NO) contacts |
Instantaneous maxi (closing) current | 7Ie,≤1s |
| Rated voltage of contacts (DC) | ≤80V | Insulation resistance(MΩ) | ≥100 |
| Rated current of contacts (A) | 600 | Dielectric withstand voltage | 1500V,p.f. 1min, no breakdown |
| Voltage drop on contacts(mV) | ≤80(at 100A) | Electric cycles (104) | ≥2 |
| Coil voltage specification(DC) | 12V, 24V, 48V, 72V etc | Mechanical cycles (104) | ≥30 |
| DC power consumption of coil (W) | ≤15.0 | Temperature rise on outgoing terminal | ≤65 |
| Pickup voltage(DC) | ≤75%Us | Temperature rise of coil(K) | ≤85 |
| Release voltage(DC) | ≥5%Us;≤40%Us | Insulation grade of enameled wire | Class B (130°C) |
| Pickup time(ms) | ≤30 | Material of contact | AgCuO(10)/Cu |
| Release time(ms) | ≤50 | Working duty | Continuous operating duty |
| Mechanical/Ambient Conditions | |||
| Torque of outgoing terminal on contact M12(N.m) |
≯35.0N appropriate | Protection grade | IP50 |
| Torque of outgoing terminal on coil M4(N.m) |
≯1.2N appropriate | Mounting methods | Freely |
| Working temperature | (-25~+55)°C | Vibration | Sine shock: 2.5g, (5~50) Hz |
| Mounting altitude | ≤2Km | Impact | 50g,11ms(Half sine) |
| Conversion Table for Coil Specification(20°C) | |||
| Voltage(V) | Coil resistance(1±10%)Ω | Voltage(V) | Coil resistance(1±10%)Ω |
| 12 | 10 | 60 | 250 |
| 24 | 42 | 72 | 391.5 |
| 48 | 170 | 80 | 426.7 |
Outline and Mounting Picture
The products are mainly used to control switching on/off of power supp
The products are mainly used to control switching on/off of power supp
The products are mainly used to control switching on/off of power supp
The products are mainly used to control switching on/off of power supp