The products are mainly used to control switching on/off of power supply of storage battery car, electric forklift, electric winch, electric car, excavator, air conditioner in vehicle
Application
ZJQ150A DC contactor 150A/36V is easy to install and maintain, has stable performance, small in size, and large load capacity. Suitable for automatic air conditioners, communication power supplies, cleaning vehicles, electric vehicles, etc.
Ordering Notice
For example: ZJQ100A/12V
The DC contactor of main contact is one NO, rated voltage not more than DC 80V, current 150A, coil
| Basic Technical Parameters (at normal conditions) | |||
| Electric Parameters | |||
| Contact type | A set of NO | Instantaneous maxi (closing) current | 7Ie,≤1s |
| Rated voltage of contacts (DC) | ≤80V | Insulation resistance(MΩ) | ≥100 |
| Rated current of contacts (A) | 150 | Dielectric withstand voltage | 1500V,p.f. 1min, no breakdown |
| Voltage drop on contacts(mV) | ≤80 | Electric cycles (104) | ≥2 |
| Coil voltage specification(DC) | 12V, 24V, 48V, 72V etc | Mechanical cycles (104) | ≥30 |
| DC power consumption of coil (W) | ≤38 | Temperature rise on outgoing terminal | ≤65 |
| Pickup voltage(DC) | ≤70%Us | Temperature rise of coil(K) | ≤85 |
| Release voltage(DC) | ≥5%Us;≤40%Us | Insulation grade of enameled wire | Class B (130°C) |
| Pickup time(ms) | ≤50 | Material of contact | AgCuO(10)/Cu |
| Release time(ms) | ≤50 | Working duty | Continuous operating duty |
| Mechanical/Ambient Conditions | |||
| Torque of outgoing terminal on contact M8(N.m) | ≯7.0N appropriate | Protection grade | IP50 |
| Torque of outgoing terminal on coil M5(N.m) | ≯2.5N appropriate | Mounting methods | Freely |
| Working temperature | (-25~+55)°C | Vibration | Sine shock: 2.5g, (5~50) Hz |
| Mounting altitude | ≤2Km | Impact | 50g,11ms(Half sine) |
| Conversion Table for Coil Specification(20°C) | |||
| Voltage(V) | Coil resistance(1±10%)Ω | Voltage(V) | Coil resistance(1±10%)Ω |
| 12 | 3.8 | 60 | 95.6 |
| 24 | 17.4 | 72 | 152.5 |
| 48 | 69.5 | 80 | 186.7 |
Outline and Mounting Picture
The products are mainly used to control switching on/off of power sup
Application The products are mainly used to control switching on/off
The products are mainly used to control switching on/off of power sup
The products are mainly used to control switching on/off of power sup